Hose type REF 201 is used for compressed air at high pressures (up to 40 bars according to NF EN 2398).
Its nitrile inner tube is resistant to compressor oil. its outer cover is resistant to abrasion.
Its metal wire spirals give good flexibility.
It can be found in mining and public works.
It can be equipped with swaged fittings and also anti-whip cables or safety stockings.

Technical specifications:

Inner tube : smooth oil resistant NBR rubber
Reinforcement : 2 metal spirals
Outer cover : abrasion and weather resistant neoprene rubber
Outer finish : fine tape wrapped
Temperature : - 30°C to +80°C
Production lengths : 60 metres
Colour : black
Marking : REF 201 - dia. - PLNE 125 bars - batch N°
Microperforated

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
201 13	12,7	1/2"	23	5	40	160	180	0,6
201 16	15,9	5/8"	27	5,5	40	160	200	0,8
201 19	19	3/4"	31	6	40	160	220	0,9
201 25	25,4	1"	39	7	40	160	250	1,1
201 32	31,8	1"1/4	46	7	40	160	300	1,6
201 38	38,1	1"1/2	53	7,5	40	160	350	1,9
201 50	50,8	2"	69	9	40	160	450	2,8
201 75	76,2	3"	94	9	40	160	650	4,3
201 100	101,6	4"	120	9	40	160	900	5,9

Possible end-fittings : male threaded, female bsp, robur, weco, flange
See also ref 223, ref 224

NF EN ISO 2398

As flexible in winter as in summer, compressed air hose REF 203 is used in workshops and particularly in garages.
Its electrically-conductive inner tube eliminates static electricity.
It can be produced in all diameters up to ID 19mm.

Technical specifications:

Inner tube : electrically - conductive EPDM
Reinforcement : textile braid
Outer cover : EPDM
Outer finish : smooth
Temperature : - 30°C to 70°C maximum
Production lengths : 20 and 40 metres
Colour : blue
Marking : RCMH - REF 203 - tuyau air conducteur/air conductive hose - NF ISO 2398 - 1A - dia. ps/wp 2 mpa/20bars/300psi - date - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
203 6x12	6	1/4"	12	3,0	20	60	30	0,11
203 8x15	8	5/16"	15	3,5	20	60	35	0,16
203 10x17	10	3/8"	17	3,5	20	60	55	0,20

Possible end-fittings : express, coupling
See also ref 222, ref 234

This hose is used in replacement of polyamide 12 brake tubes according to DIN 73324/1 for repairs of road trailers.
It gives increased safety to braking systems.

Technical specifications:

Inner tube : SBR / NR
Reinforcement : textile braids
Outer cover : SBR EPDM rubber
Admissible negative pressure : 0.9 bars
Outer finish : smooth
Temperature : - 30°C to +70°C
Production lengths : variable
Colour : black
Marking : tecalemit flexibles - UTAC ST 954-02 - dia. - SEL - batch N°

Part n°	Inner diameter	Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	mm	mm	bar	bar	mm	kg/m
207 8	8	18	5	10	65	70	0.30
207 10	10	18	4	10	65	80	0.24
207 13	13	22	4,5	10	65	120	0.34

Possible end-fittings : threaded
See also : tube PA12 DIN 73324/1

NF EN 559

This hose is intended for welding equipment.
It is light and easy to handle.
Its safety factor is very high and its resistance to hot points and flame are excellent.
It carries REF 212 for acetylene and oxygen and REF 213 for propane with a tube in NBR.

Technical specifications:

inner tube : NBR / SR and NBR rubber for REF 213
Reinforcement : synthetic yarns
Outer cover : abrasion and weather resistant synthetic rubber
Outer finish : smooth
Temperature : - 30°C to +80°C
Production lengths : 40 metres
Colour : orange for propane gas (ref 213), red for acetylene gas (ref 212), blue for oxygen gas (ref 213)
Marking : ref 212 - soudure - nf en 559 - 2 mpa (20 bars) - dia. - RCMH - year - batch N° - ref 213 - nf en 559 - 2 mpa (20 bars) - 8mm - RCMH - year - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
212 5	5	3/16"	12	3,5	20	60	45	0.13
212 6	6 ,3	1/4"	13	3,8	20	60	60	0.14
212 8	8	5/16"	15	3,5	20	60	75	0.17
212 10	10	3/8"	17	3.5	20	60	90	0.21
212 12	12	1/2"	22	4,7	20	60	110	0.34

Possible end-fittings : threaded, coupling

BS 3212 type1 BS 3212 type2

This hose is intended to transport gas
It is manufactured according to standard BS 3212 type 1 for low pressure applications (50mbars) and BS 3212 type 2 for high pressure (17,5 bars).

213 BP (Low pressure)

2123 HP (High pressure)

Technical specifications:

Inner tube : NBR rubber
Outer cover : abrasion and weather resistant synthetic rubber
Outer finish : smooth
Temperature : -25° à + 110° c
Production lengths : 40 et 60 metres
Low pressure : Colour black - standard BS 3212 type 1
High pressure : Colour orange - standard BS 3212 type 2 - reinforcement : textile braid

Part n°	Inner diameter	Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	mm	mm	bar	bar	mm	kg/m
213 BP	8	5/16"	4	0,05	20	80	0,23
213 HP	8	5/16"	4	20	60	80	0,23

Possible end-fittings : threaded, coupling

Compressed air hose ref 222 is used in workshops.
It is also chosen for air supply of jackhammers on worksites for its competitiveness.
It can be produced in any inner diameter up to 25mm.

Technical specifications:

Inner tube : smooth SBR / NBR rubber
Reinforcement : textile braid
Outer cover : SBR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C maximum
Production lengths : 40 metres, possibility of 100 metres
Colour : black or other
Marking : ref 222 - RCMH - tuyau air/air hose - NF EN ISO 2398 - 1 B - dia. working pressure - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
222 5x11	5	-	11	2.8	15	45	25	0.11
222 6x12	6	-	12	3.0	15	45	30	0.13
222 7x13	7	-	13	3.0	15	45	32	0.14
222 8x15	8	-	15	3.5	15	45	35	0.16
222 9x16	9	-	16	3.5	15	45	40	0.22
222 10x17	10	-	17	3.5	15	45	50	0.23
222 13x21	13	-	21	4	15	45	65	0.33
222 16x26	16	-	26	5.0	15	45	80	0.51
222 19x29	19	-	29	5.0	15	45	100	0.60
222 25x32	25	-	36	5.5	15	45	150	0.80

Possible end-fittings : express, coupling
See also ref 221, Ref 234

Hose REF 223 has all the qualities necessary for compressed air use in severe conditions according to NFT 47252 type B.
Its inner tube is resistant to compressor oil. its outer cover is abrasion resistant.
Its life span and inter-layer are excellent.
Produced from diameter 30mm upwards, it can be found on high rate air compressors.

Technical specifications:

Inner tube : SBR / NBR rubber
Reinforcement : textile plies
Outer cover : abrasion and weather resistant SBR rubber
Outer finish : fine tape wrapped
Temperature : - 30°C to +70°C
Production lengths : 40 metres, over dia. 100 : 20 metres
Colour : black
Marking : ref 223 - air comprimé 15 bars - production date

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
223 30x42	30	1 ”3/16	42	6.0	15	45	300	0,95
223 35x46	35	1 ”3/8	47	6.0	15	45	350	1,00
223 40x52	40	1 ”9/16	53	6.0	15	45	400	1,32
223 45x57	45	1 ”3/4	57	6.0	15	45	450	1,32
223 50x65	50,8	2 ”	65	7.0	15	45	508	1,82
223 60x76	60	2 ”3/8	76	8.0	15	45	600	2,40
223 63x79	63,5	2 ”1/2	78	7.5	15	45	635	2,7
223 70x85	70	2 ”3/4	85	7.5	15	45	700	2,54
223 76x90	76,2	3 ”	90	7.0	15	45	762	2,43
223 80x95	80	3 ”5/32	95	8.0	15	45	800	2,86
223 90x104	90	3 ”1/2	104	8.0	15	45	900	2,82
223 102x118	101,6	4 ”	118	8.0	15	45	1016	3,77
223 150	152,4	6 ”3/16	173	9.0	15	45	1254	7,50

Possible end-fittings : male bsp taper, robur, cam-lock, weco
See also ref 224

NFT 47252 B

Hose RE 224 is without doubt one of the toughest hoses on the market.
Its inner tube is resistant to compressor oil and its outer cover is abrasion resistant.
It has an excellent life span.
Moreover, its heavy textile reinforcement and its superior thickness increase its mechanical resistance to traction, flexion and other constraints.

Technical specifications:

Inner tube : oil resistant smooth SBR / NBR rubber
Reinforcement : textile plies
Outer cover : abrasion and weather resistant SBR rubber
Outer finish : fine tape wrapped
Temperature : 70°C maximum
Production lengths : 40 metres, above diameter 100 : 20 metres
Colour : black
Marking : REF 224 - air comprimé 20 bars - date / batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
224 16x27	16	5/8”	27	5.5	20	64	160	0,5
224 19x32	19	3/4”	32	6.5	20	64	190	0,73
224 25x38	25,4	1”	39	6.5	20	64	254	0,96
224 30x44	30	1”3/16	44	7.0	20	64	300	1,23
224 35x50	35	1”3/8	50	7.5	20	64	350	1,36
224 40x56	40	1”9/16	56	8.0	20	64	400	1,9
224 45x61	45	1”3/4	61	8.0	20	64	450	2,0
224 50x70	50,8	2”	68	9.0	20	64	508	2,3
224 60x78	60	2”3/8	78	9.0	20	64	600	2,7
224 63x81	63,5	2”1/2	81	9.0	20	64	635	2,9
224 70x88	70	2”3/4	88	9.0	20	64	700	3,2
224 75x96	76	3”	96	10.0	20	64	760	3,7

Possible end-fittings : male threaded, robur, cam-lock, weco
See also ref 201

NF EN ISO 2398

Hose REF 234 is produced in continuous lengths.
Its outer cover is smooth. it is a variation of hose REF 222 : thicker and with higher working pressures.
It is used on worksites for air supply of air tools.
It can be produced in any inner diameter up to 25mm with various thicknesses.

Technical specifications:

Inner tube : SBR / NBR rubber
Reinforcement : textile plies
Outer cover : abrasion and weather resistant SBR rubber
Outer finish : smooth
Temperature : - 30°C to +70°C
Production lengths : 40 metres
Colour : black or other
Marking : REF 234 - RCMH - tuyau air/air hose - NF EN ISO 2398 - 4 A - dia. - working pressure - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
234 5x11	5		11	3.0	20	60	25	0.10
234 6x14	6		14	4.0	20	60	30	0.17
234 7x16	7		16	4.5	20	60	35	0.20
234 9x17	9		17	4.0	20	60	40	0.22
234 10x18	10		18	4.0	20	60	50	0.24
234 13x23	13		23	5.0	20	60	60	0.30
234 16x26	16		26	5.0	20	60	80	0.46
234 19x30	19		30	5.5	20	60	100	0.59
234 25x37	25		37	6	20	60	130	0.9

Possible end-fittings : express, coupling
See also ref 221, ref 222

Although extremely lightweight, hose REF 277 can accept high working pressures.
It is used for light compressed air service or wherever its weight and compact dimensions are the determinating factors.
Its outer cover and inner tube are produced with one single induction which interpenetrates the braiding, rendering ideal adherence between the layers.
The proportion of elastomer nitrile-pvc is 70/30%.
It benefits from the NSFS 61 112 approval for diameters 25, 45, 70 and 110.

Technical specifications:

Inner tube : elastomer nitrile - PVC
Reinforcement : textile braid
Outer cover : abrasion and weather resistant nitrile - PVC
Outer finish : smooth with longitudinal ribs
Temperature : - 20°C to 70°C maximum
Production lengths : 20 and 40 metres, up to 200 metres to order
Colour : black
Marking : none

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
277 20	20		24.0	2.0	25	80	-	0.16
277 25	25	1”	29.0	2.0	25	75	-	0.18
277 38	39	1”1/2	40.5	2.2	18	55	-	0.28
277 40	40	1”9/16	44.5	2.2	18	55	-	0.30
277 42	42	1”21/32	46.5	2.2	18	50	-	0.34
277 45	45	1”3/4	49.5	2.3	18	50	-	0.37
277 50	52	2”	55.0	2.3	18	50	-	0.44
279 50	52	2”	59	3.5	18	60	-	0.65
280 50	52	2”	59	3.5	25	90	-	0.65
277 55	55		60.0	2.4	18	50	-	0.47
277 60	60	2”3/8	65.0	2.4	18	50	-	0.51
277 65	64	2”1/2	68.5	2.5	18	50	-	0.53
277 70	70	2”3/4	75.0	2.5	18	50	-	0.60
277 75	75	3”	81.0	2.5	18	50	-	0.70
277 80	80		85.5	2.7	18	50	-	0.77
277 90	90	3”1/2	95.5	2.8	18	50	-	0.95
277 100	102	4”	107.5	3.0	15	45	-	1.05
277 110	110	4”11/32	116.0	3.0	15	45	-	1.20
277 125	127	5”	133.0	3.2	10	30	-	1.42
277 150	152	6”	158.0	3.2	10	30	-	1.71

Possible end-fittings : guillemin, robur, cam-lock
See also ref 223

SAE J2006R2

Extremely flexible and light, hose M42 is particularly intended for pleasure boats.
It passes easily from engine comparment through bulkheads to exhaust oulet valve.
Yacht racers appreciate its linear mass.
It replies to sae J2006 style R2 (10/2003) standards relative to pleasure boat wet exhausts, which defines burst pressure, admissible elongation, adherence of components, abrasion and aging resistance of the hose, which must resist exhaust gases during 2 minutes without water cooling.

Technical specifications:

Inner tube : smooth black SBR rubber
Reinforcement : 1 textile ply and 1 spiral
Outer cover : SBR rubber
Outer finish : wrapped and corrugated
Production lengths : 60 metres - 20 metres from dia. 127
Colour : black
Marking : RCMH - M42 - special echappement - marine wet exhaust - SAE J2006 - batch N° - date

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
M42 40	40	1”9/16	46	3	-	3	80	0.7
M42 45	45	1”3/4	51	3	-	3	90	0.8
M42 50	50,8	2”	57	3	-	3	100	1.0
M42 54	54		60	3	-	3	110	1.1
M42 55	55		61	3	-	3	110	1.1
M42 60	60	2”3/8	66	3	-	3	120	1.2
M42 63	63,5	2”1/2	70	3	-	3	140	1.3
M42 76	76,2	3”	82	3	-	3	150	1.8
M42 80	80	3”5/32	86	3	-	3	160	1.9
M42 90	90	3”1/2	96	3	-	3	180	2.0
M42 102	101,6	4”	108	3	-	3	200	2.1
M42 104	104		110	3	-	3	210	2.2
M42 114	114	4”1/2	121	3.5	-	3	230	2.4
M42 127	127	5”	135	4	-	3	250	2.9
M42 140	140	5”1/2	148	4	-	3	280	2.9
M42 150	152,4		162	5	-	3	420	3.2