Half-symetrical fittings guillemin system :

Water

Chemicals

Food industry

Guillemin fittings are manufactured in diameters from 15 to 150, according to NFE 29 572 standards.
They allow connection of the hose. the rotation of the lock compresses the rubber joint for sealing.
Assembly is facilitated by its symetrical shape. it can be supplied with a safety lever on the locking ring thereby preventing uncoupling due to vibrations.
For safety reasons, they are not used for gases or compressed air.

Production: half-symetrical guillemin fittings are supplied either with ribbed shanks, male or female BSP or NPT threads or butt-welding ends. other variations are available : plugs, reducers, miscellaneous adaptors.

Material : aluminium, AS7GO6, bronze, 316L stainless steel, polypropylene

Joints : NBR, white EPDM, hypalon, PTFE

Use : suction, discharge of liquids and powders

Nominal diameter D	Hose diameter D	DE	M	Aluminium weight	Stainless steel weight
mm	mm	mm	mm	g	g
15	20	37	34	-	100
20	25	48	42	55	165
25	30	54	44	70	210
32	35	61	46	90	265
40	45-40-35-30-25	74	55	160	490
50	55-60	91	64	270	805
65	70-65	108	65	370	1090
80	90-85-80-76	132	76	725	1925
90	100	145	86	1015	-
100	110-100	151	83	995	2795
150	150-162	236	123	3585	-

Can be used on : ref 113 - 121 - 131 - 141 - 142 - 491 - 492 - 731 - 772 - 777 - 831 - 842

Victaulic coupling for concrete pumping hoses :

Abrasives

Water

The coupling is comprised of two fittings of the same size connected by a levered clamp. sealing is ensured by a joint incorporated into the clamp.
Reaming of the hose is carried out at both ends in order to obtain full flow after mounting the fittings, thereby eliminating retention and avoiding blockages and obstruction of the hose.

Production : inspired by the victaulic system, production of these hose end-fittings for pumping concrete at 85 bars is carried out by machining a groove over the whole circumference of the tube : model V (Victaulic), P (Putzmeiser), W (wibau) or by welding a male or female collar on the tube : model SC (Schwing).

Material : steel or other finishes on request.

Joints : NBR

Part n°	Nominal diameter	Mod.	Hose diameter	A	B	C	D	E	Working pressure
	Inch		mm	mm	mm	mm	mm	mm	Bars
798 50 2	2”	V	50.8	12	16	50	57.2	60.3	60
798 50 2	3”	V - P	50.8	20	16	50	84.9	88.9	60
798 63.3	3”	V - P	63.5	20	16	63	84.9	88.9	60
798 76 3	3”	S - C	76.1	20	16	76	84.0	88.9	60
798 100 4	4”	V - P - W	101.6	21	16	101	108.0	114.3	50
798 100 4.5	4” 1/2	P - SC - W	101.6	15	17	101	115.0	127.0	85
798 125 5V	5”	V	127.0	10	15.9	127.0	137.0	141.3	50
798 125 5	5”	P - W	127.0	18	15.9	127.0	133.0	141.O	85
798 125 5.5	5”1/2	P - W - SC	127.0	18	16.0	127.0	139.0	148.0	85
798 150 6V	6”	V	152.4	10	15.9	152.4	164.0	168.3	40
798 150 6	6”	P	152.4	18	22.0	152.4	159.0	168.0	50

Can be used on : ref 711 - 791 - 798

Round flange fittings PN 16 / 20 / 50 / 100 / 250 / 420 :

Air & gas

Abrasives

Food industry

Chemicals

Water

Flanges are used for connecting pipes in fixed installations for the widest range of fluids.
Elastomer hoses can also be equipped for connection to these. flanges are chosen for being robust and reliable.

Production :they are made according to ISO or ANSI standards over the majority of diameters and for nominal pressures from 2 to 420 bars.
Face sealing surfaces can be flat, raised (single or double interlocking, annular joint) and joints can be in any material.
The ISO PN 16 flange is the same as the PN 10 flange up to DN 150.

Material : steel, stainless steel, polypropylene

Joints : fibre, steel, rubber

Use : all applications

 

Round flange fittings PN16/20/50
Nominal diameter	ISO PN			ISO PN 20 AINSI B 16,5 CASS 150			ISO PN 50 AINSI B 16,5 CASS 300
mm	Diameter	K	NberxL	Diameter	K	NberxL	Diameter	K	NberxL
20	105	75	4 x 14	99	69.8	4 x 19	117	82.6	4 x 19
25	115	85	4 x 14	108	79.4	4 x 15.8	124	88.9	4 x 19
32	140	100	4 x 18	117	88.9	4 x 15.8	133	98.4	4 x 19
40	150	110	4 x 18	127	98.4	4 x 15.8	156	114.3	4 x 22.2
50	165	125	4 x 18	152	120.6	4 x 19	165	127.0	8 x 19
65	185	145	4 x 18	178	139.7	4 x 19	190	149.2	8 x 22.2
80	200	160	8 x 18	190	152.4	4 x 19	210	168.3	8 x 22.2
100	220	180	8 x 18	229	190.5	8 x 19	254	200	8 x 22.2
125	250	210	8 x 18	254	215.9	8 x 22.2	279	235	8 x 22.2
150	285	240	8 x 22	279	241.3	8 x 22.2	318	269.9	12 x 22.2
200	340	295	12 x 22	343	298.4	8 x 22.2	381	330.2	16 x 25.4
250	405	355	12 x 26	406	362	12 x 25.4	444	387.4	16 x 28.5
300	460	410	12 x 26	483	432	12 x 25.4	521	450.8	16 x 31.8

Round flange fittings PN100/250/420
Nominal diameter	ISO PN 100 AINSI B 16,5 CASS 600			ISO PN 250 AINSI B 16,5 CASS 1500			ISO PN 420 AINSI B 16,5 CASS 250
mm	Diameter	K	NberxL	Diameter	K	NberxL	Diameter	K	NberxL
20	1117	82.6	4 x 19	130	88.9	4 x 22.2	140	95.3	4 x 22.2
25	124	88.9	4 x 19	149	101.6	4 x 25.4	159	108	4 x 25.4
32	133	98.4	4 x 19	159	111.1	4 x 25.4	184	130	4 x 28.5
40	156	114.3	4 x 22.2	178	123.8	4 x 28.5	203	146	4 x 31.8
50	165	127	8 x 19	216	165.1	8 x 25.4	235	171.5	8 x 28.5
65	190	149.2	4 x 22.2	244	190.5	8 x 28.5	267	196.9	8 x 31.8
80	210	168.3	8 x 25.4	267	203.5	8 x 31.8	305	228.6	8 x 35
100	273	215.9	8 x 25.4	311	241.3	8 x 35	356	273.0	8 x 41.1
125	330	266.7	8 x 28.5	375	292.1	8 x 41.1	419	323.9	8 x 47.8
150	356	292.1	12 x 28.5	394	317.5	12 x 38.1	483	368.3	8 x 53.8
200	419	349.2	12 x 31.8	483	393.7	12 x 44.5	552	438.2	12 x 53.8
250	508	431.8	16 x 35	584	482.6	12 x 50.8	673	539.8	12 x 66.5
300	603	489.0	20 x 35	673	571.5	16 x 53.8	762	619.3	12 x 73.2

Can be used on : all types

Weco fitting :

Hydrocarbons

water

Weco fittings are used for connections between flexible hoses or pipes and mainly in the field of oil drilling where their exceptional robustness is appreciated along with their resistance to high pressures and temperatures.
Coupling of the male threaded part and the female half is made by a hammerlock nut, found on the male fitting.

Production : Weco fittings are available in a large range of diameters from ND 1" to ND 12" and pressure ratings (from 69 to 1380 bars).
Each pressure rating is identified by a colour code.
Weco fittings can be supplied as NPT threaded unions, plugs or weld fittings.

Material :: mild or stainless steel

Joints : PTFE, O-ring, bronze according to figure

Use suction/delivery of water, hydrocarbons, chemical products, gas, high pressure compressed air.

Figure		100	200	206	207	211	400	600	602	1002	1003	100	100	100
Working pressure		69	138	138	138	138	276	414	414	690	1380	1380	1380	1380
Nominal diameter
1”	Length weight	- -	66 0.8	66 0.8	- -	70 0.9	- -	90 1.5	90 1.5	90 1.6	- -	110 3.6	- -	- -
1” 1/4	Length weight	- -	71 1.0	71 1.0	- -	77 1.4	- -	- -	119 4.2	124 4.0	- -	- -	- -	- -
1” 1/2	Length weight	- -	71 1.2	71 1.2	- -	77 1.6	- -	124 4.2	124 4.5	124 4.3	- -	137 5.4	- -	- -
2”	Length weight	92 2.6	83 2.3	83 2.3	- -	88 2.7	133 4.8	163 6.6	152 5.4	128 5.8	121 5.4	178 8.7	188 10	187 12
2” 1/2	Length weight	109 4.2	105 4.O	105 4.O	- -	106 4.3	157 7.3	192 9.1	143 7.3	159 7.9	- -	184 10	- -	- -
3”	Length weight	124 6.4	115 6.1	115 6.1	95 4.5	114 7.3	158 8.6	222 12	144 15	138 10	232 20	194 13	267 44	243 19
4”	Length weight	146 10	125 8.4	125 8.4	109 7.4	124 8.2	209 13	256 18	144 14	144 15	278 33	216 34	- -	- -
5”	Length weight	- -	- -	- -	- -	- -	266 22	- -	- -	156 25	278 33	- -	- -	- -
6”	Length weight	171 20	169 19	169 19	148 17	--	281 29	--	--	165 36	--	--	--	--
8”	Length weight	183 29	183 29	183 29	- -	- -	291 43	- -	- -	- -	- -	- -	- -	- -
10”	Length weight	- -	231 41	231 41	- -	- -	270 68	- -	- -	- -	- -	- -	- -	- -
12”	Length weight	- -	- -	- -	- -	- -	278 74	- -	- -	- -	- -	- -	- -	- -

Can be used on : ref 113 - 121 - 141 - 142 - 444 - 491 - 641 - 681 - c 20 - c 40

Half-symetrical storz fitting

Food industry

Hydrocarbons

Water

Storz fittings exist in a wide variety of diameters, the most common being those according to applicable DIN standards.
The ribbed shank and the shape of the joint vary between models intended for discharge and those for suction.
Symetrical and easy to fit, they allow rapid connection of hoses by the rotation of the fitting, compressing the joint to ensure sealing.

Production : the half-symetrical storz fitting can be supplied either with ribbed shanks or male or female threads. other variations are possible : reducers, storz/guillemin adaptors, plugs.

Material : aluminium WP 16 bars, brass, 316L stainless steel

Joints : nitrile, viton, silicone

Use : water or hydrocarbon suction/discharge, hot air, discharge of powders.

Nominal diameter	Hose diameter	Diameter A	Diameter B	Diameter C	Diameter D
mm	mm	mm	mm	mm	mm
25	13 à 25	55	31	10 à 18	15,5 à 26,3
32	20 à 32	68	44	16 à 24	22 à 32
38	25 à 38	78	51	18 à 32	25 à 40,5
45	32 à 45	88	59	25 à 37	34 à 45
52	20 à 53	98	66	18 à 45	22 à 55
65	38 à 75	118	81	31 à 65	40 à 75
75	65 à 80	126	89	56 à 70	65 à 80
90	90	144	105	65 à 80	90
100	100	156	115	90	100
110	90 à 110	182	133	80 à 100	90 à 110
125	135 à 134	196	148	113 à 120	125 à 134
135	135	213	159	124	135
150	150	215	160	138	150
165	150 à 160	244	188	140 à 148	152 à 160
205	205	280	220	185	205
250	260	353	278	242	260

Can be used on : ref 113 - 141 - 142 -416 - 491 - 731 - 831 - 842

Camlock fittings according to MIL - C27487F

Air & gas

Abrasives

Food industry

Chemicals

Water

Camlock fittings are generally used for quick connections between hoses or between these and fixed installations.
The connection consists of an adaptor (male) and a coupling (female) held together by two levered cams, parallel to the coupling body (it is the female half which has the cams).
Sealing is ensured by a flat joint in the coupling.
Disconnection is facilitated by the rings on the levers. size 1/2” and 8” fittings are not interchangeable with other makes as these sizes do not correspond to any standard.

Differents types of camlock :

type A : female threaded adaptor
type B : male threaded coupling
type C : ribbed shank coupling
type D : female threaded coupling
type E : ribbed shank adaptor
type F : male threaded adaptor
type DC : camlock plug

Production : adaptors and couplings can be supplied with a ribbed shank or with BSP or NPT male or female threads. other versions are possible, notably couplings with safety devices, reductions, weld-type, sealing adaptors.

Material : aluminium, steel, 316L stainless steel, bronze, polypropylene

Joints : buna (standard), epdm, viton, ptfe

Use : water suction/discharge, petroleum products, hot air, dry cement, mortar, chemical products

D2	D1	Nominal diameter		Aluminium			Bronze			Stainless steel
				weight	PS	Part n°	weight	PS	Part n°	weight	PS	Part n°
mm	mm	inch		g	bar/psi		g	bar/psi		g	bar/psi
37	15	1/2”	Adaptor E Coupling C	--	-	--	75 150	10/150	1604.100 1614.100	65 135	10/150	1604.800 1614.800
50	15	3/4”	Adaptor E Coupling C	--	-	--	135 220	17/250	1604.104 1614.104	100 215	17/250	1604.804 1614.804
50	21,5	3/4”	Adaptor E Coupling C	70 130	17/250	1604.505 1614.505	155 260	17/250	1604.105 1614.105	150 265	17/250	1604.805 1614.805
62	27,4	1”	Adaptor E Coupling C	100 170	17/250	1604.511 1614.511	210 390	17/250	1604.111 1614.111	245 380	17/250	1604.811 1614.811
80	34,1	1”1/4	Adaptor E Coupling C	140 290	17/250	1604.518 1614.518	420 690	17/250	1604.118 1614.118	385 655	17/250	1604.818 1614.818
87	40,5	1”1/2	Adaptor E Coupling C	215 330	17/250	1604.524 1614.524	560 710	17/250	1604.124 1614.124	555 780	17/250	1604.824 1614.824
98	53,2	2”	Adaptor E Coupling C	290 410	17/250	1604.531 1614.531	835 920	17/250	1604.131 1614.131	755 1080	17/250	1604.831 1614.831
111	66,7	2”1/2	Adaptor E Coupling C	405 500	10/250	1604.537 1614.537	1330 1440	10/250	1604.137 1614.137	1075 1640	12/220	1604.837 1614.837
143	76	3”	Adaptor E Coupling C	660 770	9/130	1604.583 1614.583	1800 1950	9/120	1604.183 16014.183	1740 1920	14/200	1604.883 1614.883
171	102	4”	Adaptor E Coupling C	1060 1260	7/100	1604.552 1614.552	2700 3200	7/100	1604.152 1614.152	2800 3100	7/100	1604.852 1614.852
196	131	5”	Adaptor E Coupling C	1230 1460	5/70	1604.557 1614.557	4340 4550	5/70	1604.157 1614.157	4000 7070	7/100	1604.857 1614.857
253	155,5	6”	Adaptor E Coupling C	2370 2375	5/70	1604.562 1604.562	7890 7500	5/70	1604.162 1614.162	8000 13500	7/100	1604.862 1614.862

Can be used on : ref 113 - 121 - 141 - 142 - 242 - 616 - 641 - 681 -791 - 841 - 847 - 851 - 854 - 855

Frame hose coupling & gaskets for hose ref 744 :

Abrasives

Water

Les 1/2 brides de raccordements pour le tuyau Ref 744 permettent un accouplement de plusieurs sections du tuyau et ainsi de s’adapter immédiatement au poste de travail par mise à longueur du tuyau sur site.
Les brides sont orientables au montage, indéformable en service et réutilisables après démontage sur les flexibles usagés.
La mise en oeuvre est rapide et ne nécessite pas d’outillage particulier.
Le raccordement est possible sur tout type de brides.

Production : coupling dimensions according to PN10 - DIN 2576.

Material : aluminium

Joints : Synthetic rubber.

Use : For suction and disharge of dry bulk materials, sand, gravel, dry cement, etc. Specific to hose 744

Frame hose coupling

Part N°	Diameter		Diameter 0	Diameter G	C	B	Diameter D	Drilling
	mm	inch	mm	mm	mm	mm	mm	number
R744 80	80	3”1/8	208	160	101	20	18	4
R744 100	100	4”	230	180	102	20	18	4
R744 125	125	5”	250	210	112	24	10	8
R744 150	150	6”	295	240	152	24	22	8
R744 200	200	8”	352	295	171	26	22	8
R744 250	250	10”	405	350	186	28	22	12
R744 300	300	12”	445	400	190	28	22	12

Gaskets

Part N°	Diameter		Diameter D	Diameter D1	Diameter D2	C	B
	mm	inch	mm	mm	mm	mm	mm
J744 80	80	3”1/8	118	78	75,5	23	3,5
J744 100	100	4”	138	98	95,5	23	3,5
J744 125	125	5”	183	123	120	31,5	4
J744 150	150	6”	208	148	145	31,5	4
J744 200	200	8”	250	198	195	31,5	4
J744 250	250	10”	311	248	245	37	4
J744 300	300	12”	366		292	37	4

Le raccord express est principalement destiné à l’air comprimé.
Il permet de réunir par simple rotation des coquilles, deux éléments de tuyauterie.
L’étanchéité est assuré par la compression de deux joints à lèvre.
Sa conception symétrique le rend très fonctionnel.
Sa forme lui assure une tenue parfaite même lorsqu’il est soumis à des vibrations et est construit en laiton matricé.

Raccords à tourillon :

Matière : zinc pour les références M6, M8, M10, RM10 et inox pour les références M8W4

REF M6 REF M8 REF M10 REF M10

REF M8-W4

Diamètre nominal	Ref : M6	Ref : M8	Ref : M10	Ref : RM10	Ref : M8 W4
mm	Largeur de bande/mm
23 -25	20	23	30	30	23
26 -28	20	23	30	30	23
29 -31	20	23	30	30	23
32 -35	20	23	30	30	23
36 -39	20	23	30	30	23
40 -43	20	23	30	30	23
44 -47	20	23	30	30	23
48 -51	20	23	30	30	23
52 -55	20	23	30	30	23
56 -59	20	23	30	30	23
60 -63	20	23	30	30	23
64 -67	20	23	30	30	23
68 -73	20	23	30	30	23
74 -79	20	23	30	30	23
80 -85	20	23	30	30	23
86 -91	20	23	30	30	23
92 -97	20	23	30	30	23
98 -103	20	23	30	30	23
104 -112	20	23	30	30	23
113 -121	20	23	30	30	23
122 -130	20	23	30	30	23
131 -139	20	23	30	30	23
140 -148	20	23	30	30	23
149 -161	20	23	30	30	23
162 -174	20	23	30	30	23
175 -187	20	23	30	30	23
188 -200	20	23	30	30	23
200 -220	20	23	30	30	23
201 -213	20	23	30	30	23
214 -226	20	23	30	30	23
220 -240	20	23	30	30	23
227 -239	20	23	30	30	23
240 -252	20	23	30	30	23
240 -260	20	23	30	30	23
248 -260	20	23	30	30	23
260 -280	20	23	30	30	23
280 -300	20	23	30	30	23
300 -325	20	23	30	30	23
325 -350	20	23	30	30	23
350 -375	20	23	30	30	23
375 -400	20	23	30	30	23
400 -425	20	23	30	30	23
425 -450	20	23	30	30	23
450 -475	20	23	30	30	23
475 -500	20	23	30	30	23