Intended for suction and delivery of tar, bitumen and hot petroleum products, hose REF 401 80/90 is produced in predetermined lengths with flexible cuff-ends.
Diameter 25 is protected by an external metal spiral.
Diameters 38, 50 and 63 have a smooth outer cover and can be cropped to length.
The hose structure is protected from heat by a fibreglass interlayer.
The quality of its outer cover affords excellent resistance to ozone and bitumenous products.
It has a low bend radius.
It can be supplied equipped with half-symetrical, threaded or flange fittings along with ADR test certificate.

Ø 25

Ø 38 Ø 50 Ø 63

Ø 80

Technical specifications:

Inner tube : smooth black synthetic rubber
Reinforcement : fibreglass protection, textile plies and metal spiral
Outer cover : abrasion and weather resistant CR / NBR rubber
Outer finish : dias. 38, 50 and 63 : smooth, dias. 80 and 25 : corrugated (external metal protection spiral for dia. 25)
Temperature : +180°C maximum
Production lengths : 40 metres, dia. 80 : 3, 4, 6 metres, dia.25 : 5, 8, 15 metres
Electrical conductivity : 1 copper braid or external spiral
Colour : black
Marking : sel - REF 401 - bitume 180°C - PS 10 bars - rcmh industries - production date or batch N°
Particularities : oversized cuff-ends (88mm) on dia. 80

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
401 25	25,4	1”	47	8	10	40	200	1,3
401 38x56	38,1	1”1/2	55	8,5	10	40	260	1,89
401 50x70	50,8	2”	68	8,5	10	40	300	2,35
401 63	63,5	2”1/2	81	9	10	40	400	2,80
401 80 C 90	80	3”5/32	110	15	10	40	600	4,56

Possible end-fittings : male threaded, guillemin
See also ref 402, ref 411

Intended for hose reels found on tar spreading machines, hose REF 402 has excellent bend radius and is very easy to handle.
It does not fear shocks or crushing.
this hose can be swaged with threaded fittings and supplied with ADR test certificate.

Technical specifications:

Inner tube : smooth black synthetic rubber
Reinforcement : 2 metal wire spirals
Outer cover : abrasion and weather resistant rubber
Outer finish : wrapped
Temperature : +180°C maximum
Production lengths : 40 and 60 metres
Electrical conductivity : via metal spirals
Colour : black
Marking : sel - REF 402 - bitume 180°C - PS 10 bars - RCMH - production date or batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
402 19	19	3/4”	32	6,5	10	40	200	0,75

Possible end-fittings : male threaded
See also ref 401, ref 411

DIN 73379 TYPE B

Produced according to past standard DIN 733379 type B, hose REF 404 is an excellent fuel hose.
It is very light and maintains its round shape.
It has a braided outer finish.
Its very low bend radius allows it to be easily routed through thermal engine compartments.
In diameter 3.2 mm, it is used for injection ramp return lines on diesel engines.

Technical specifications:

Inner tube : smooth black NBR rubber
Reinforcement : cotton braid
Outer finish : braided
Temperature : - 40°C to +80°C
Production lengths : variable
Colour : black
Marking : DIN 733379 type B - dia.

Part n°	Inner diameter	Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	mm	mm	bar	bar	mm	kg/m
404 3,2x7	3,2	7	1,9	10	30	40	0,038
404 3,5x7,5	3,5	7,5	2	10	30	45	0,043
404 4x8	4	8	2	10	30	45	0,046
404 4x9	4	9	2,5	10	30	45	0,062
404 4,5x9,5	4,5	9,5	2,5	10	30	50	0,067
404 5x9	5	9	2	10	30	50	0,055
404 5x10	5	10	2,5	10	30	50	0,073
404 5,5x10,5	5,5	10,5	2,5	10	30	50	0,077
404 6x11	6	11	2,5	10	30	60	0,082
404 6x12	6	12	3	10	30	60	0,104
404 6,5x11	6,5	11	2,25	10	30	60	0,081
404 7x12	7	12	2,5	10	30	60	0,092
404 7,5x12,5	7,5	12,5	2,5	10	30	65	0,099
404 7,5x14,5	7,5	14,5	3,5	10	30	65	0,154
404 8x13	8	13	2,5	10	30	65	0,113
404 8x15	8	15	3,5	10	30	65	0,170
404 9x15	9	15	3	10	30	65	0,143
404 9,5x14,5	9,5	14,5	2,5	10	30	70	0,118
404 10x15	10	15	2,5	10	30	75	0,122
404 10x16	10	16	3	10	30	75	0,162
404 10x17	10	17	3,5	10	30	75	0,204
404 11x16	11	16	2,5	10	30	75	0,145
404 11x17,5	11	17,5	3,25	10	30	75	0,191
404 11x19	11	19	4	10	30	75	0,257
404 12x17	12	17	2,5	10	30	95	0,149
404 12x18	12	18	3	10	30	95	0,169
404 12,5x19	12,5	19	3,25	10	30	95	0,217
404 13x18	13	18	3	10	30	95	0,163
404 14x22	14	22	4	10	30	95	0,316
404 15x20	15	20	2,5	10	30	-	0,193
404 16x23	16	23	6,5	10	30	-	0,260
404 18x26	18	26	4	10	30	-	0,388
404 19x27	19	27	4	10	30	-	0,395

Possible end-fittings : CB range
See also ref 405, ref 406, ref 407

DIN 73379 / E

Hose REF 405 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel).
Its inner tube is antistatic.

Technical specifications:

Inner tube : black antistatic nitrile rubber
Reinforcement : textile braid
Outer cover : CR / SBR rubber
Outer finish : smooth
Temperature : - 30°C to + 90°C, peaks to 110°C
Production lengths : 50 metres
Colour : black
Marking : REF 405 - DIN 73379 type 2A - dia. x thickness - nbr/cr - batch N°
Particularity : antistatic

Part n°	Inner diameter	Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	mm	mm	bar	bar	mm	kg/m
405 3,5x9,5	3,5	9,5	3	10	30	45	0.08
405 5x11	5	11	3	10	30	50	0.10
405 6x12	6	12	3	10	30	60	0.10
405 7x13	7	13	3	10	30	70	0.12
405 8x14	8	14	3	10	30	80	0.13
405 9,5x15,5	9,5	15,5	3	10	30	80	0.14
405 12x19	12	19	3.5	10	30	100	0.20

Possible end-fittings : Threaded, CB range
See also ref 404, ref 407, ref 406

DIN 73379 / E

Hose REF 406 is intended for conveying fuels with up to 50% aromatic content (lead-free fuel). its inner tube is antistatic.
Its hypalon outer cover allows use of this hose in 90°C continuous atmospheres with peaks up to 110°C.
This outer cover also has excellent resistance to aging and ozone effects.

Technical specifications:

Inner tube : black antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CSM
Outer finish : smooth
Temperature : - 40°C to +90°C, peaks to 110°C
Production lengths : 25 or 50 metres
Colour : black
Marking : REF 406 - DIN 73379 type 2B - dia. x thickness - nbr/csm - batch N° - month/year
Particularity : antistatic

Part n°	Inner diameter	Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	mm	mm	bar	bar	mm	kg/m
406 3,5x9,5	3,5	9,5	3	10	30	45	0.08
406 5x11	5	11	3	10	30	55	0.10
406 5,5x11,5	5,5	11,5	3	10	30	60	0.10
406 7,5x13,5	7,5	13,5	3	10	30	70	0.12
406 8x15	8	15	3	10	30	80	0.13
406 9x15	9	15	3	10	30	80	0.14
406 11,5x18,5	11,5	18,5	3.5	10	30	80	0.15
406 13x20	13	20	3.5	10	30	100	0.20

Possible end-fittings : Threaded, CB range
See also ref 404, ref 405, ref 407

DIN 73379

Two types of reels are available : Reel type P in black plastic destined for wholesalers for sale by the metre and Reel type C in cardboard, with a shorter length of hose, more destined for end-users.
These reels can carry one of 3 types of fuel hose : hose type 400 in non-reinforced nitrile rubber, hose type 404 in nitrile rubber with external textile braid reinforcement and hose type 405 in textile reinforced rubber with rubber outer cover.

Hose Ref 400	Hose Ref 404	Hose Ref 405
Reel type P Dimensions : width : 200 mm ext. diameter : 170 mm spindle diameter : 30 mm		Reel type CC width : 115 mm ext. diameter : 185 mm spindle diameter : 45 mm

Part n°	Hose Reel	Hose type	Inner diameter	Outer diameter	length	Weight
			mm	mm	mm	kg/m
400 D3 20M	C	400	3,2	7	20	1,02
404 D3 20M	C	404	3,2	7	20	1,02
404 D3 30M	P	404	3,2	7	30	1,43
400 D4 20M	C	400	4	7	20	0,98
404 D5 20M	C	404	4,5	9,5	20	1,69
404 D5 25M	P	404	4,5	9,5	25	2,10
405 D5 15 M	C	405	5	11	15	1,90
404 D6 15M	C	404	5,5	10,5	15	1,49
404 D6 25M	P	404	5,5	10,5	25	2,16
405 D6 15M	C	405	6	12	15	1,97
405 D7 10M	C	405	7	13	10	1,48
404 D8 15 M	C	404	7,5	12,5	15	1,56
404 D8 25M	P	404	7,5	12,5	25	2,58
405 D8 10M	C	405	8	14	10	1,67
404 D9 25M	P	404	9	15	25	3,10
404 D10 10M	C	404	9,5	14,5	10	1,30
405 D10 15M	C	405	9,5	15,5	15	1,82
404 D12 8M	C	404	11	17	8	1,51
404 D12 25M	P	404	11	17,5	25	3,50
405 D12 8M	C	405	12	19	8	1,51

NF EN ISO 7840

Intended for supply of fuel to marine engines on pleasure craft, hose REF 407 corresponds to the international standard ISO 7840 type A1.
This rating defines the inner tube’s lowest permeability to fuels according to that standard.
The quality of the outer cover protects the hose from projections within the engine compartment. S
waged with end-fittings, this hose can be supplied “ready-to-use”..

Technical specifications:

Inner tube : NBR rubber, resistant to hydrocarbons
Reinforcement : textile braid
Outer cover : CR rubber
Outer finish : smooth
Temperature : - 30°C to +93°C maximum
Production lengths : 40 metres
Colour : black
Marking : tecalemit flexibles - NF EN ISO 7840 - type A1 - lot - dia. - 1 mpa - production date - batch N°

Part n°	Inner diameter	Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	mm	mm	bar	bar	mm	kg/m
407 8X16	8	16	4	10	30	70	0.20
407 10X18	10	18	4	10	30	90	0.23
407 13X22	13	22	4.5	10	30	120	0.36
407 16X25	16	25	4.5	10	30	150	0.40
407 19X29	19	29	5	10	30	190	0.48

Possible end-fittings : male or female threaded
See also ref 362, ref 441

Hose REF 411 is intended for suction and delivery of tar, bitumen and hot petroleum products.
The quality of its outer cover affords excellent resistance to ozone and bitumenous products. I
t has a low bend radius. it can be swaged with threaded fittings.

Technical specifications:

Inner tube : black synthetic rubber
Reinforcement : textile plies and metal spiral
Outer cover : abrasion and weather resistant microperforated CR / NBR rubber
Outer finish : wrapped
Temperature : +120°C
Production lengths : 40 metres
Electrical conductivity : 1 copper braid
Colour : black
Marking : REF 411 - emulsion de bitume 80°C - production date or batch

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
411 19	19	3/4"	30	5,5	5	80	50	0,9
411 25	25	1"	36,5	5,5	5	70	60	1,1

Possible end-fittings : male threaded with male union 1”1/4, male threaded 3/4 with female union 1”1/4

EN 13765 TYPE 2

Hose REF 416 is intended for suction and delivery hydrocarbon whatever aromatic content.
Its exceptional flexibility and its extremely small radius makes it very handy.
Accordingly, it is installed on most tankers for delivery of oil at service stations.
It comes equipped with end-fittings (helical barbed tail) and two electrical coils providing the electrical conductivity.
this hose can be swaged with threaded fittings and supplied with ADR test certificate.

Technical specifications:

Inner tube : polypropylene film
Renforcement : Multiple polypropylene films between two helical turns in galvanized steel
Reinforcement : textile PVC coated
Outer finish :: smooth with external metal protection spiral
Temperature : - 40° à + 100° c
Production lengths : 40 metres
Colour : black with red stripe
Marking : tecalemit flexibles - 416 - PS 10 bars - (trimester/year) - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
416 40	40	1”9/16	51	5,5	10	40	85	1,1
416 50	50	2”	61,5	6,2	10	40	125	1,7
416 65	63,5	2”1/2	78	6,2	10	40	150	2,4
416 80	80	3”5/32	93	6,5	10	40	180	2,9
416 100	100	4”	103	6,5	10	40	250	3,7

Possible end-fittings : guillemin, Camlock, Flanges, b.s.p

This hose is specifically designed for aircraft refueling.
It meets BS 3158/85 and EN 1361 type C standards.

Technical specifications:

Inner tube : kerosene resistant, black antistatic synthetic rubber
Reinforcement : polyester braiding
Outer cover : hydrocarbon, weather and abrasion resistant antistatic black rubber
Production lengths : 60 metres
Limit of climatic conditions : - 40°C to +70°C
Electrical conductivity : 103 to 106/m
Outer finish : wrapped
Marking : Tecalemit Flexibles – Part N° - EN 1361 TYPE C – ND – batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
993 43 11	3/4”	19	30	20	40	80	0,51	115
993 43 12	1”	25	38	20	40	80	0,81	150
993 43 13	1”1/4	32	45	20	40	80	1,10	200
993 43 14	1”1/2	38	51	20	40	80	1,17	230
993 43 15	2”	50	65	20	40	80	1,65	305
993 43 16	2”1/2	63	79	20	40	80	2,18	390
993 43 17	3”	76	92	20	40	80	2,50	460
993 43 18	4”	101,5	121	20	40	80	3,95	610

Semi-lay flat hose REF 441 is intended for suction and deliver fuels at a pressure of 10 bar.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.

Technical specifications:

Inner tube : black nitrile NBR rubber
Renforcement : textile plies
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : -40° à +120°c maximum
Production lengths : 40 metres
Colour : black
Marking : ref 441 - refoulement hydrocarbures 10 bars - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
441 25	25,4	1”	35	4,8	10	30	254	0,60
441 32	32	1”1/4	42	5	10	30	320	0,74
441 38	38	1”1/2	48	5	10	30	380	0,83
441 44	44,5	1”3/4	55	5,25	10	30	445	1,0
441 50	50,8	2”	62	5,6	10	30	510	1,23
441 63	63,5	2”1/2	75	5,75	10	30	635	1,60
441 75	76,2	3”	88	5,9	10	30	762	1,89
441 90	90	3”1/2	104	7	10	30	900	2,72
441 100	101,6	4”	116	7,2	10	30	1016	3,19
441 127	127	5”	143	8	10	30	1270	4,32
441 150	152,4	6”	168	7,8	10	30	1524	5,05

Possible end-fittings : Threaded, guillemin, tankwagen, flange, storz

The multipurpose hose Ref 444 has a working pressure of 30 bar diameters up to 70mm
His recovery neoprene gives it excellent resistance to ozone.
his outer finish is fine tape wrapped.
It accepts carry many products such as air, gas oil, grease, oil, antifreeze solutions, insecticides, fungicides, and chemicals in a wide temperature range.
It is interesting for maintenance crews or on remote sites because it eliminates the stock pipe.

Technical specifications:

Inner tube : black smooth synthetic rubber
Renforcement : braid or textile plies according to the diameter
Outer cover : abrasion and weather resistant neoprene rubber
Outer finish : fine tape wrapped
Electrical conductivity : copper braid inserted between textile plies
Temperature : - 40° C à +120°C
Production lengths : variable, above Ø 38 : 40 metres
Colour : black

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
REF 444 32	32	1” 1/4	44.5	6.4	30	160	254	1.00
REF 444 38	38	1” 1/2	51	6.5	30	160	240	1.03
REF 444 40	40	1” 9/16	56	8	30	160	300	1.7
REF 444 50	50	2”	67	8	30	130	400	1.9
REF 444 60	60	2” 3/8	76	8	30	100	480	2.1
REF 444 70	70	2” 3/4	84	7	30	100	520	2.2
REF 444 80	80	3” 5/32	94	7	30	100	600	2.3
REF 444 90	90	3” 1/2	106	8	30	100	750	2.8
REF 444 100	100	4”	117	8	30	100	900	3.1

Possible end-fittings : guillemin

Hose REF 462 is particularly appreciated by industrial site maintenance services.
It accepts hot glycol water, compressed air, oil and hydrocarbons up to 40% aromatic content.
It has static electricity conductiveness.
Its reinforcement and thickness give it excellent bend radius.

Technical specifications:

Inner tube : antistatic NBR rubber
Reinforcement : textile braid
Outer cover : CR / SBR rubber
Outer finish : smooth
Temperature : - 30°C to +93°C maximum
Production lengths : 25 or 50 metres
Colour : black
Marking : tecalemit flexibles - part N° - tuyau multiservice/multipurpose hose - antistatic - ps/wp 25/350psi - DN (mm/inch) - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
462 6x14	6	1/4”	14	4	25	85	20	0.16
462 8x16	8	5/16”	16	4	25	85	25	0.21
462 10x18	10	3/8”	18	4	25	85	30	0.26
462 13x21	13	1/2”	21	4	25	85	45	0.33
462 16x25	16	5/8”	25	4.5	25	85	65	0.40
462 19x29	19	3/4”	29	5	25	85	100	0.55
462 25x35	25	1”	35	5	25	85	180	0.60

Possible end-fittings : Threaded, CB range
See also ref 461, ref 362, ref 405

Intended for suction and discharge of hydrocarbons, hose REF 490 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.

Technical specifications:

Inner tube : black NBR nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +120°C maximum
Production lengths : 40 metres
Colour : black
Marking : REF 490 - aspiration refoulement hydrocarbures 20 bars - production date or batch

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
REF 490 50	50,8	2”	68	9	20	60	300	2,3
REF 490 65	63,5	2”1/2	81	9	20	60	390	3,0
REF 490 75	76,2	3”	95	9,5	20	60	460	3,8
REF 490 100	101,6	4”	123	11	20	60	610	5,4
REF 490 125	127	5”	180	11	20	60	760	7,3
REF 490 150	152,4	6”	177	12,5	20	60	900	9,5
REF 490 200	203,2	8”	233	15	20	60	1400	18

Possible end-fittings : threaded, guillemin, tankwagen, flange, storz
See also ref 491, 492, 495

SAE 100 R4

Intended for suction and discharge of hydrocarbons, hose REF 491 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.
This versatile hose, available in many diameters, can be cut to order.

Technical specifications:

Inner tube : black NBR nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +120°C maximum
Production lengths : 20 metres
Colour : black
Marking : REF 491 - aspiration refoulement hydrocarbures 10 bars - production date or batch

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
491 19	19	3/4”	32	6.5	10	80	120	0.9
49125	25,4	1”	38	6.5	10	70	150	1.1
491 30	30	1” 3/16	43	6.5	10	60	190	1.1
491 32	31,8	1” 1/4	45	6.5	10	60	200	1.1
491 35	35	1” 3/8	48	6.5	10	50	220	1.0
491 38	38,1	1” 1/2	52	7	10	50	250	1.7
491 40	40	1” 9/16	54	7	10	40	280	1.8
491 42	42	1” 21/32	56	7	10	40	300	1.9
491 50	50,8	2”	64	7	10	40	300	2.2
491 60	60	2” 3/8	74	7	10	30	320	2.2
491 65	63,5	2” 1/2	77	7	10	30	540	2.5
491 70	70	2” 3/4	84	7	10	30	570	2.8
491 75	76,2	3”	90	7	10	30	600	3.5
491 90	90	3” 1/2	104	7	10	30	720	4.0
491 100	101,6	4”	116	7	10	30	800	4.8
491 110	110	4” 11/32	127	8.5	10	30	890	5.3
491 114	114,3	4” 1/2	131	8.5	10	30	940	6.0
491 120	120	4” 23/32	138	9	10	30	980	6.3
491 125	127	5”	145	9	10	30	1100	6.6
491 140	139,7	5” 1/2	158	9	10	30	1250	8.0
491 150	152,4	6”	172	10	10	30	1500	9.0
491 160	160		182	11	10	30	1700	9.8
491 200	203,2	8”	230	14	10	30	2000	17

Possible end-fittings : threaded, guillemin, tankwagen, flange, storz
See also ref 492

SAE 100 R4

Hose REF 492 is intended for suction of oil on hydraulic powerpacks.
Economic, it can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is used for discharge when a low bend radius is necessary.

Technical specifications:

Inner tube : black nitrile rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 1 copper braid
Outer finish : wrapped
Temperature : - 40°C to +120°C maximum
Production lengths : 40 metres
Colour : black
Marking : tecalemit flexibles - part N° - SAE100R4 - dia. - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
492 19	19	3/4”	30	5.5	5	15	130	0.70
492 25	25,4	1”	36	5.5	5	15	180	0.80
492 30	30	1”3/16	41	5.5	5	15	210	0.91
492 32	31,8	1”1/4	43	5.5	5	15	225	0.99
492 35	35	1”3/16	46	5.5	5	15	245	1.10
492 38	38,1	1”1/2	49	5.5	5	15	265	1.20
492 40	40	1”9/16	51	5.5	5	15	280	1.28
492 42	42	1”21/32	53	5.5	5	15	295	1.32
492 45	45	1”3/4	56	5.5	5	15	315	1.40
492 50	50,8	2”	61	5.5	5	15	350	1.60
492 55	55	-	66	5.5	5	15	380	1.90
492 60	60	2”3/8	72	6	5	15	420	2.30
492 63	63,5	2”1/2	75	6	5	15	450	2.50
492 70	70	2”3/4	82	6	5	15	500	2.80
492 76	76,2	3”	89	6.5	5	15	550	3.10
492 80	80	3”5/32	93	6.5	5	15	600	3.50
492 90	90	3”1/2	103	6.5	5	15	650	3.90
492 100	101,6	4”	113	6.5	5	15	690	4.30

Possible end-fittings : threaded
See also ref 491

EN 1761 SD

Intended for suction and discharge of hydrocarbons, hose REF 491 has 4 textile plies and a metal spiral.
It is a very robust suction hose.
It can be used over a wide range of temperatures and its neoprene outer cover ensures excellent resistance to ozone.
It is intended for the delivery of oil by truck - tank.
It meets NF EN 1761 type SD (suction and delivery) standard.
this hose can be swaged with guillemin end-fittings and supplied with ADR test certificate.

Technical specifications:

Inner tube : black nitrile NBR rubber
Reinforcement : 4 textile plies and one metal spiral
Outer cover : abrasion and weather resistant neoprene rubber
Electrical conductivity : 2 copper braid
Outer finish : wrapped
Temperature : -40°C à +120°C
Production lengths : 40 metres
Colour : black
Marking : tecalemit flexibles - 495 - hydrocarbures 10 bars

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
495 70	70	2” 3/4	84	7	10	50	500	2,8
495 90	90	3” 1/2	106	8	10	42	650	4,2
495 100	101,6	4”	118	8	10	42	690	5,8
495 120	120	4”3/4	142	11	10	40	700	7,0
495 150	152,4	6”	175	11,5	10	40	1050	9,0

Possible end-fittings : threaded, guillemin, tankwagen, flange, storz