off-shore hoses

C20
C30
C40

High pressure hose
21O / 345 / 420 bars

C20 hose is intended to convey fluids under pressure in applications where a high flow rate is needed. the inner tube in the standard version is compatible with mineral oils used in hydraulic circuits, air, fresh and sea water, fuels with up to 40% aromatics, drilling mud.
For other fluids, the elastomer composition can be modified.
The textile plies distribute the pressure on the inner tube.
The steel wires of the cables are treated against corrosion.
The outer cover is resistant to ozone, oils and abrasion.
On request, it can be flame resistant.
Miscellaneous types of fittings can be swaged on this hose : international standard flanges, line-pipe fittings, specific end-fittings on request.

Technical specifications:

Inner tube : NBR / CR rubber
Reinforcement : textile plies, 2 or 4 cable spirals
Outer cover : CR rubber
Outer finish : wrapped
Temperature : - 50°C to +90°C
Colour : black

C 20
C 30
C 40

Part n°	Inner diameter		Outer diameter	Number of cables	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
C20 63	63,5	2”1/2	109	2	210	560	900	13
C20 76	76,2	3”	126	2	210	525	1000	18
C20 102	101,6	4”	149	2	210	525	1200	19
C20 127	127	5”	180	2	210	525	1400	28
C20 152	152,4	6”	204	2	210	525	1500	33

Embouts utilisables : A brides, filetés mâle NPT

Part n°	Inner diameter		Outer diameter	Number of cables	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
C30 63	63,5	2”1/2	108	2	345	870	900	13
C30 76	76,2	3”	126	2	345	870	1000	18
C30 100	101,6	4”	165	4	345	870	1400	32
C30 125	127	5”	197	4	345	870	1600	48
C30 150	152,4	6”	225	4	345	870	1700	58

Embouts utilisables : A brides, filetés mâle NPT

Part n°	Inner diameter		Outer diameter	Number of cables	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
C40 63	63,5	2”1/2	111	2	420	1050	900	14,9
C40 76	76,2	3”	139	4	420	1050	1200	26,2
C40 100	101,6	4”	165	4	420	1050	1400	32
C40 125	127	5”	198	4	420	1050	1600	48
C40 150	152,4	6”	225	4	420	1050	1700	58

Possible end-fittings : flange, male npt