Robust and resistant to temperature, hose REF 111 is destined for delivery of industrial waters.
Its outer cover is a mixture of SBR / EPDM rubbers resisting aging and ultra-violet effects as well as numerous detergents and diluted acids.
His 6 textile plies gives it excellent resistance to round.

Technical specifications:

Inner tube : SBR smooth rubber
Reinforcement : 6 textile plies
Outer cover : SBR / EPDM rubber
Outer finish : wrapped
Temperature : 90°C
Production length : 20 metres
Colour : black
Marking : RCMH - refoulement 15 bar - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
REF 111 50	50,8	2”	60	6	15	45	400	1.4
REF 111 60	60	2” 3/8	72	6	15	45	540	1.7
REF 111 70	70	2” 3/4	82	6	15	45	630	1.9
REF 111 75	76	3”	88	6	15	45	750	2.0
REF 111 80	80	3” 5/32	92	6	15	45	800	2.2
REF 111 90	90	3” 1/2	103	6.5	15	45	900	2.7
REF 111 100	101,6	4”	115	6.5	15	45	1000	3.0
REF 111 110	110	4” 11/32	124	7	15	45	1100	3.7
REF 111 120	120	4” 23/32	134	7	15	45	1200	4.0
REF 111 150	152,4	6”	166	7	15	45	1500	5.8
REF 111 200	203,2	8”	219	8	15	45	2000	7.9

Possible end-fittings : Guillemin, flange, camlock, storz
See also Ref 111, Ref 131

Robust and resistant to temperature, hose REF 113 is destined for delivery of industrial waters.
Its outer cover is a mixture of SBR / EPDM rubbers resisting aging and ultra-violet effects as well as numerous detergents and diluted acids.

Technical specifications:

Inner tube : SBR smooth rubber
Reinforcement : textile plies
Outer cover : SBR / EPDM rubber
Outer finish : wrapped
Temperature : 90°C
Production length : 20 metres, possibility of 60 metres on request
Colour : red
Marking : RCMH - refoulement 10 bar - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
113 16	16	5/8”	24	4	10	30	160	0,35
113 19	19	3/4”	27	4	10	30	190	0,40
113 22	22	7/8”	30	4	10	30	220	0,45
113 25	25,4	1”	33	4	10	30	254	0,50
113 30	30	1” 3/16	39	4 ,5	10	30	300	0,67
113 35	35	1” 3/8	45	5	10	30	350	0,80
113 40	40	1” 9/16	50	5	10	30	400	0,90
113 45	45	1” 3/4	55	5	10	30	450	1,0
113 50	50,8	2”	61	5,1	10	30	508	1,10
113 60	60	2” 3/8	71	5,5	10	30	600	1,5
113 70	70	2” 3/4	81	5,5	10	30	700	1,7
113 75	75	3”	89	7	10	30	750	2,2
113 80	80	3” 5/32	92	6	10	30	800	2.2
113 90	90	3” 1/2	104	7	10	30	900	3,00
113 100	101,6	4”	115	6.7	10	30	101	3,10
113 110	110	4” 11/32	122	6	10	30	1100	2,91
113 120	120	4” 23/32	134	7	10	30	1200	3,50
113 127	127	5”	141	7	10	30	1270	4,20
113 150	152,4	6”	165	6,3	10	30	1254	4,18
113 200	203,2	8”	218	7,4	10	30	2032	6,75
113 250	254	10”	272	9	10	30	2504	10,22

Possible end-fittings : Guillemin, flange, camlock, storz
See also Ref 111, Ref 131

Water delivery hose REF 117 is used on fishing vessel decks.
Its EPDM rubber cover ensures long life and flexibility in cold temperatures.
Its thickness gives excellent dimensional stability.
A high quality water delivery hose, it is used for many chemical products.

Technical specifications:

Inner tube : white EPDM rubber
Reinforcement : 2 textile plies
Outer cover : EPDM rubber
Outer finish : wrapped
Temperature : 95°C maximum
Production lengths : 20 metres
Colour : red
Marking : ref 117 - le bigouden - refoulement 7 bars - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
117 30	30	1” 3/16	42	6	6	18	240	1,0
117 35	35	1” 3/8	47	6	6	18	280	1,10
117 40	40	1” 9/16	52	6	6	18	320	1,25
117 50	50,8	2”	62	6	6	18	406	1,42

Possible end-fittings : Guillemin
See also ref 113, ref 119

The water delivery hose REF 119 has excellent flexibility even during very low colds. Its dimensional stability is ideal also.
A high quality water delivery hose, it is appreciated in the shipping industry, in mussel farming (its resistance to abrasion is excellent) and in fishing.
It is aso used for many diluted acids.

Technical specifications:

Inner tube : parablond rubber
Reinforcement : 2 textile plies
Outer cover : parablond rubber
Admissible negative pressure : 0.9 bars
Outer finish : wrapped
Temperature : 60°C maximum
Production lengths : 20 metres
Particularity : very flexible
Colour : light beige
Marking : none

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
119 19	19	3/4”	28	4.5	5	15	152	0,36
119 25	25,4	1”	34	4.5	5	15	203	0,50
119 30	30	1”3/16	41	5	5	15	240	0,65
119 35	35	1”3/8	46	5	5	15	280	0,75
119 40	40	1”9/16	52	6	5	15	320	0,95
119 45	45	2”3/4	57	6	5	15	360	1,00
119 50	50,8	2”	62	6	5	15	406	1,10
119 57	57	2”1/4	69	6	5	15	456	1,20
119 60	60	2”3/8	72	6	5	15	480	1,30
119 80	80	3”5/32	92	6	5	15	640	2,20
119 100	101,6	4”	114	6.5	5	15	813	2,80
119 125	127	5”	142	7.5	5	15	1016	4,00

Possible end-fittings : Threaded, guillemin
See also ref 113, ref 117

Produced to order or available in stocked lengths, hose REF 121 is the ideal mobile moto-pump suction hose.
It has an excellent bend radius and flexible cuff-ends allowing easy and sure mounting of end-fittings.
It reamins flexible even in very cold temperatures.
Iit accepts maximum negative pressure.

Technical specifications:

Inner tube : smooth SBR rubber
Reinforcement : textile plies and metal spiral
Outer cover : abrasion and weather resistant SBR rubber
Outer finish : wrapped and corrugated. flexible cuff-ends
Temperature : 90°C
Production lengths : all lengths
Colour : black
Marking : none
Particularity : possibility of belled or oversize cuff-ends

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
121 25	25,4	1”	34	4.5	3	9	76,2	0.6
121 30	30	1” 3/16	39	4.5	3	9	90	0.7
121 35	35	1” 3/8	44	4.5	3	9	105	0.9
121 40	40	1” 9/16	49	4.5	3	9	120	1.0
121 45	45	1” 3/4	54	4.5	3	9	135	1.3
121 50	50,8	2”	60	5	3	9	152	1.5
121 60	60	2” 3/8	70	5	3	9	180	1.8
121 65	63,5	2” 1/2	76	5.5	3	9	190	1.9
121 70	70	2” 3/4	82	6	3	9	210	2.0
121 75	76,2	3”	88	6	3	9	305	2.3
121 80	80	3” 5/32	93	6.5	3	9	400	2.9
121 90	90	3” 9/16	103	6.5	3	9	450	3.4
121 100	101,6	4”	116	7	3	9	508	4.0
121 110	110	4” 11/32	124	7	3	9	660	4.5
121 120	120	4” 23/32	136	8	3	9	720	4.9
121 125	127	5”	143	8	3	9	762	5.7
121 150	152,4	6”	168	8	3	9	915	8.3
121 200	203,2	8”	223	10	3	9	1219	13.0
121 250	254	10”	278	12	3	9	1524	20.0
121 300	304,8	12”	333	14	3	9	1829	26.0

Possible end-fittings : Guillemin, flange, globe-type
See also ref 123

This lay-flat hose intended for water delivery is mainly used for submersible pumps in industry and public works.
Its light weight and sturdiness are its main qualities, along with its temperature resistance allowing use in hot regions during summer.

Technical specifications:

Inner tube : black SBR rubber
Reinforcement : 2 or 4 textile plies according to diameter
Outer cover : abrasion and weather resistant SBR rubber
Outer finish : wrapped
Temperature : 90°C maximum
Production lengths : up to dia. 150 : 40/60 metres, above dia. 150 : 20 metres
Colour : black
Marking : ref 131 - refoulement eau 5 bars - batch N°
Particularity : can be rolled flat

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
131 45	45	1” 3/4	51	3	5	15	-	0,5
131 50	50	2”	58	3	5	15	-	0,96
131 60	60	2” 3/8	67	3.5	5	15	-	1,00
131 65	63,5	2” 1/2	70	3.5	5	15	-	1,05
131 70	70	2” 3/4	77	3.5	5	15	-	1,15
131 75	76,2	3”	83	3.5	5	15	-	1,27
131 80	80	3” 5/32	88	10.0	5	15	-	1,50
131 90	90	3” 9/16	98	3.5	5	15	-	1,62
131 100	101,6	4”	108	4	5	15	-	1,34
131 110	110	4” 11/32	118	4	5	15	-	1,5
131 120	120	4” 23/32	128	4	5	15	-	2,00
131 150	152,4	6”	162	4	5	15	-	3,18
131 200	203,2	8”	212	5	5	15	-	3,81
131 250	254	10”	265	5.5	5	15	-	6,28
131 300	304,8	12”	316	5.5	5	15	-	7,1

Possible end-fittings : globe-type, flange
See also ref 132, ref 277

NF S 61113 NF EN14557

Extremely robust, hose type REF 141 is intended for industrial water suction.
With 4 textile layers, it accepts high peak pressures and can be used for delivery where a low bend radius is required.
iIt can accept negative pressure over 0.9 bars.
Its resistance to abrasion and aging in water are excellent.
In diameters 45, 70 and 110 it can be produced in suction lengths NF S61 113 and NF EN 14557 for civil protection equipments.

Technical specifications:

Inner tube : smooth SBR rubber
Reinforcement : 4 textile plies and metal spiral
Outer cover : abrasion and weather resistant SBR rubber
Admissible negative pressure : 0.9 bars
Outer finish : wrapped
Temperature : 90°C maximum
Particularity : cuff-ends possible
Production lengths : 20 or 40 metres
Colour : black
Marking : REF 141 - aspiration refoulement - 10 bars - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
141 19	19	3/4”	30	5.5	10	30	76	0,64
141 25	25,4	1”	37	5.5	10	30	102	0,86
141 30	30	1” 3/16	41	5.5	10	30	120	0,90
141 35	35	1” 3/8	47	6	10	30	140	1,2
141 40	40	1” 9/16	53	6.5	10	30	160	1,5
141 42	42	1” 21/32	55	6.5	10	30	168	1,4
141 45	45	1” 3/4	57	6	10	30	180	1,5
141 50	50,8	2”	63	6.5	10	30	203	1,8
141 55	55	4” 11/32	70	6.5	10	30	220	2,3
141 60	60	2” 3/8	74	7	10	30	240	2,4
141 65	63,5	2” 1/2	77	7	10	30	254	2,4
141 70	70	2” 3/4	84	7	10	30	315	2,7
141 75	76,2	3”	91	7.5	10	30	343	3,2
141 80	80	3” 5/32	96	8	10	30	360	3,5
141 90	90	3” 1/2	106	8	10	30	405	3,9
141 100	101,6	4”	118	8	10	30	508	4,5
141 110	110	4”11/32	128	9	10	30	550	5,4
141 120	120	4” 23/32	138	9	10	30	600	6,0
141 125	127	5”	145	9	10	30	635	6,4
141 140	140	5” 1/2	160	10	10	30	700	8,2
141 150	152,4	6”	172	10	10	30	762	8,7
141 168	168	6” 5/8	190	11	10	30	924	10,5
141 200	203,2	8”	229	13	10	30	1118	15,2

Possible end-fittings : Guillemin, flange, cam-lock, storz
See also ref 142

Extremely robust, hose type REF 142 is intended for industrial water suction.
With its 4 textile layers, it can accept high pressure peaks and is used in delivery where a low bend radius is required.
It can accept negative pressures above 0.9 bars.
Its resistance to abrasion and aging in water are excellent.

Technical specifications:

Inner tube : smooth SBR rubber
Reinforcement : 4 textile plies and metal spiral
Outer cover : abrasion and weather resistant SBR rubber
Admissible negative pressure : 0.9 bars
Outer finish : wrapped
Temperature : 90°C maximum
Particularity : cuff-ends possible
Production lengths : 20 or 40 metres
Colour : black
Marking : REF 142 - aspiration refoulement - 5 bars - production date - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
142 50	50,8	2”	62	6	5	15	203,2	1,67
142 55	55	2” 11/32	69	6	5	15	220	1,62
142 60	60	2” 3/8	71	5,5	5	15	240	1,90
142 75	76,2	3”	87	6	5	15	342	2,40
142 80	80	3” 5/32	92	6	5	15	360	2,76
142 100	101,6	4”	116	7	5	15	457	4,11
142 110	110	4”11/32	125	7,5	5	15	495	5

Possible end-fittings : Guillemin, flange, cam-lock, storz
See also ref 141

Hose REF 162 is intended for cooling circuits of thermal engines.
Its inner tube is resistant to anti-freeze. it is flexible and light.
Possibility of cropping to 1 metre lengths in production.

Technical specifications:

Inner tube : smooth EPDM rubber
Reinforcement : 2 textile plies
Outer cover : EPDM rubber
Outer finish : wrapped
Temperature : - 30°C to 120°C
Production lengths : 40 metres
Colour : black
Marking : REF 162 - eau chaude - 3 bars - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
162 13	12,7	1/2”	20	3.5	3	12	127	0,28
162 16	15,4	5/8”	24	4	3	12	154	0,6
162 19	19	3/4”	27	4	3	12	190	0,41
162 25	25,4	1”	34	4,5	3	12	254	0,58
162 30	30	1” 3/16	38	4	3	12	300	0,61
162 35	35	1” 3/8	43	4	3	12	350	0,70
162 40	40	1” 9/16	49	4 ,5	3	12	400	0,93
162 45	45	1” 3/4	53	4	3	12	450	0,97
162 50	50,8	2”	60	5	3	12	508	1,19
162 60	60	2” 3/8	70	5	3	12	600	1,50
162 65	63,5	2” 1/2	73	5	3	12	635	1,60
162 70	70	2” 3/4	80	5	3	12	700	1,70
162 75	76,2	3”	86	5	3	12	762	1,90
162 80	80	3” 5/32	90	5	3	12	800	2,1
162 90	90	3” 9/16	102	6	3	12	900	2,58
162 100	101,6	4”	114	6	3	12	1016	2,7
162 110	110	4” 11/32	122	6	3	12	1100	3,1

Possible end-fittings : Threaded
See also ref 163

DIN 13411

Hose REF 163 is intended for cooling water circuits on thermal engines.
Its inner tube is resistant to anti-freeze.
This hose is produced in continuous lengths with a smooth outer finish.

Technical specifications:

Inner tube : smooth EPDM rubber
Reinforcement : 1 textile braid
Outer cover : EPDM rubber
Outer finish : smooth
Temperature : - 30°C to 120°C
Production lengths : 50 metres and variable
Colour : black
Marking : tecalemit flexibles - part N° - eau chaude/hot water - DIN 73411 - EPDM - dia. ps/wp - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
163 6x12	6		12.0	3.0	10	30	60	0,12
163 8x14	8		14.0	3.0	10	30	80	0,15
163 10x17	10		17 .0	3,5	10	30	100	0,18
163 12x19	12		19.0	3,5	10	30	120	0,20
163 14x21	14		21.0	3,5	10	30	140	0,22
163 15x23	15		23.0	4	6	18	150	0,28
163 16x23	16		23.0	3,5	10	30	160	0,25
163 19x26	19	3/4 "	26.0	3,5	10	30	190	0,29
163 25x33	25	2”	33.0	4	10	30	250	0,43

Embouts utilisables : filetés
Voir aussi Réf 162, Réf 164

Hose REF 164 is intended for cooling water circuits on thermal engines.
Its inner tube is resistant to anti-freeze. it is flexible and light.
Possibility of cutting to 1 metre lengths in production.

Technical specifications:

Inner tube : smooth EPDM rubber
Reinforcement : textile plies, metal spiral
Outer cover : EPDM rubber
Outer finish : wrapped
Temperature : - 30°C to 120°C
Production lengths : 1 metres
Colour : black
Marking : REF 164 - eau chaude - 4 bars - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
164 22x30	22		30	4.0	4	12	88	0,42
164 25x34	25,4	1”	34	4.5	4	12	102	0,47
164 28x36	28,5	1” 1/8	36	4.0	4	12	114	0,51
164 30x38	30	1” 3/16	38	4.0	4	12	120	0,55
164 32x41	31,8	1” 1/4	41	4.5	4	12	127	0,59
164 35x45	35	1” 3/8	45	5.0	4	12	140	0,75
164 38x47	38,1	1” 1/2	47	4.5	4	12	152	0,78
164 40x49	40	1” 9/16	49	4.5	4	12	160	0,81
164 42x52	42	1” 21/32	52	5.0	4	12	168	0,88
164 45x55	45	1” 3/4	55	5.0	4	12	180	0,93
164 48x58	48		58	5.0	4	12	192	1,00
164 51x61	50,8	2”	61	5.0	4	12	203	1,07
164 57x67	57,1		67	5.0	4	12	228	1,27
164 60x70	60	2” 3/8	70	5.0	4	12	240	1,25
164 63x73	63,5		73	5.0	4	12	254	1,31
164 70x80	70	2” 3/4	80	5.0	4	12	280	1,50
164 76x86	76,2	3”	86	5.0	4	12	305	1,56
164 102x112	101,6	4”	112	5.0	4	12	106	1,80

Possible end-fittings : Threaded
See also ref 162, ref 163

This textile reinforced hose, used for hydrodynamically cleaning sewers or industrial sites, has great weight advantage over metal braid hoses.
This structure also increases safety of users.
The outer cover is comprised of an extremely abrasion resistant rubber (also used for sand blasting) greatly increasing life of the hose.

Technical specifications:

Inner tube : black SBR rubber
Reinforcement : 2 textile braids
Outer cover : abrasion resistant SBR / NR rubber
Outer finish : wrapped
Temperature : - 40°C to +90°C
Production lengths : between 80 and 120 metres
Colour : black
Marking : REF 191 - 200 bars - dia. - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
191 19	19	3/4”	31,6	6,5	250	625	90	0,60
191 25	225	1”	39,3	7	250	625	105	0,80

Possible end-fittings : BSP

NF EN 853

Produced on flexible mandrils, this hose is vulcanised on reels.
In diameter 25, hose part N° 993 68 05 is made for this application, with a thick cover.
Hose assemblies equipped with either swaged or reusable end-fittings can be supplied with a test certificate.

Technical specifications:

Inner tube : black nitrile rubber
Reinforcement : 1 or 2 metal braids
Outer cover : abrasion and weather resistant neoprene rubber
Outer finish : wrapped
Temperature : - 40°C to +120°C
Production lengths : between 80 and 120 metres
Colour : black
Marking : tecalemit flexibles - part N° - standard - dia. - batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
993 45 03	13	1/2"	21,4	4,5	203	640	178	0.34
993 95 09	13	1/2"	23,0	5,1	349	1100	178	0.62
993 95 05	13	1/2"	25,4	6,3	349	1100	178	0.74
993 36 02	19	3/4"	28,5	4,8	133	420	240	0.64
993 77 09	19	3/4"	30,1	5,6	269	850	240	0.98
993 77 05	19	3/4"	32,6	6,8	269	850	240	1,02
993 68 09	25	1”	38,9	6,8	206	650	300	1,38
993 68 05	25	1”	40,9	7,8	206	650	300	1,45
993 68 40	25	1”	36	5,3	209	650	250	1,22

Possible end-fittings : BSP

Intended for high pressure cleaning at 400 bars, this hose is available with two different microperforated outer covers : a very robust black one and a blue one which does not mark floors.
In both cases, the outer cover resists animal fats and a wide range of detergents and its thickness ensures good resistance to wear.

Technical specifications:

Inner tube : high temperature black nitrile rubber
Reinforcement : 2 metal braids
Outer cover : abrasion resistant neoprene rubber
Outer finish : wrapped
Temperature : +160°C
Production lengths : variable
Colour : black or blue
Marking : tecalemit flexibles - part N° - lavage 400 bars - DN (mm/inch) batch N°

Part n°	Inner diameter		Outer diameter	Wall thickness	working pressure	Burst pressure	Bend radius	Weight
	mm	Inch	mm	mm	bar	bar	mm	kg/m
567 6 B	6,4	1/4"	15,7	12,7	400	1200	102	0.37
567 8 B	7,9	5/16"	17,3	14,3	400	1200	114	0.45
567 10 B	10	3/8"	19,7	16,7	400	1200	127	0.57
567 13 B	12,7	1/2"	23,1	19,8	400	1200	178	0.65
567 8 N	7,9	5/16"	17,3	14,3	400	1200	114	0,45
567 10 N	10	3/8"	19,7	16,7	400	1200	127	0,57

Possible end-fittings : hydraulics end-fittings
See also ref 513