MANUCLAIR® braided pvc tubes are comprised of a flexible translucent pvc inner tube (abbreviation of soft polyvinyl chloride), a single braid of white polyester yarn and a flexible PVC coating.
The inner tube is obtained by extrusion.
It is then cooled before passing through a vertical braider and an angle extrusion head which deposits the outer cover.
MANUCLAIR® tubes are :
- Food quality.
- Translucent rendering the conveyed product visible.
- Flexible.
- Resistant to many common products.
Even though they are less flexible, less sturdy and accept lower working temperatures than their rubber counterparts, MANULEF® tubes are universally used for their main qualities : food compatibility, translucent aspect and resistance to many fluids.
Admissible working temperatures of manuclair® tubes range from 0°C to +60°C.
Marking of tubes is as follows : “tecalemit flexibles - manuclair - ID x OD - PS/WP 20 bars 23° - batch N° - Alimentaire”
Table of MANUCLAIR® working pressure ratios with regards to workig temperatures :

T(°C)	0° à 20°	30°	40°	50°	60°
Pressure (%)	165%	72%	50%	38%	25%

The values of working pressure ratios according to working temperatures indicated above represent only the average of the results obtained from burst pressures divided by a safety factor, given that these are variable according to tube diameter and wall thickness.

Manuclair®
Part n°	Outer diameter (mm)	Inner diameter (mm)	Wall thickness (mm)	Non-burst pressure limit 23°c (bars)	Working pressure 23°c (bars)	Weight (gr/mm)	Bend radius (mm)	Available
0011005000	11	6,3	2,4	60	15	85	45	25m
0011010000	13	8	2,5	60	15	130	60	25m
0011015000	15	10	2,5	60	15	160	70	25m
0011025000	18	12,5	2,8	60	15	180	90	25m
0011030000	22	16	3	60	15	230	120	25m
0011035000	26	19	3,5	60	15	320	140	25m
0011040000	33	25	4	60	15	450	180	25m

Other diameters on request

Manuflex® tubes are comprised of an NBR nitrile rubber inner tube, a single galvanised steel braid and an outer cover in translucent flexible PVC.
The inner tube is obtained by extrusion.
It is then braided in a horizontal braider and passes through an angle head extruder which applies the outer cover in translucent polyvinyl chloride to protect the steel braid from external aggression.
Manuflex® tubes are :
- Very robust with regards to impacts.
- Highly polyvalent.
- Very flexible.
- Easy to maintain.
Very flexible, Manuflex® tube is highly safe for everday use. its burst pressure is very high and its translucent PVC outer cover, whilst protecting the steel braid, allows users to check the condition of same.
It is for this reason that this is used as a multipurpose hose in the chemical industry.
Admissible working temperatures of Manuflex® tubes range from 0°C to +60°C.
Marking of manuflex tubes is as follows : “tecalemit flexibles - part N° - manuflex - ID - batch N°”
Table of Manuflex® working pressure ratios with regards to working temperatures :

T(°C)	0° à 20°	30°	40°	50°	60°
Pressure (%)	100%	100%	100%	100%	100%

The values of working pressure ratios according to working temperatures indicated above represent only the average of the results obtained from burst pressures divided by a safety factor, given that these are variable according to tube diameter and wall thickness.

NBR tube, galvanised steel braid and translucent pvc cover
Part n°	Outer diameter (mm)	Inner diameter (mm)	Wall thickness (mm)	Non-burst pressure limit 20°c (bars)	Working pressure 20°c (bars)	Weight (gr/mm)	Bend radius (mm)	Tolerance on outer diameter (mm)	Tolerance on inner diameter (mm)	Available
0010610030	10,2	4	3	130	43	128	30	+0,30/-0,30	+0,50/-0,50	Long lengths
0010610040	12	6	3	114	38	152	40	+0,30/-0,30	+0,50/-0,50	Long lengths
0010610050	15	8	3	114	38	222	60	+0,30/-0,30	+0,50/-0,50	Long lengths
0010610040	16	10	3	108	36	51	75	+0,40/-0,40	+0,50/-0,50	on request
0010610070	18	12	3	81	27	62	90	+0,40/-0,40	+0,50/-0,50	on request
0010610080	22	15	3,5	78	26	90	180	+0,40/-0,40	+0,50/-0,50	on request

MALUFORM® tubes are comprised of an aluminium sheet covered on both faces by a polyethylene film then covered by a polyethylene coating.
This construction, very light, combines certain advantages of metal tubes and plastic tubes.
The maluform® tube can be cold shaped without any tools and is resistant to corrosion and atmospheric agents.
It can also be buried or sunk in reinforced concrete. it is possible to use push-in fittings on this tube.
Consequently, maluform® tube can be found in pneumatic instrumentation, confined spaces or in humid or corrosive atmospheres.
Working temperatures of maluform® tubes range from -30°C to +70°C with peaks up to 80°C.
In general, maluform® tubes are produced in long lengths on wooden reels.
They are then repacked in 25 metre or 100 metre reels. maluform® tubes are of black colour and are supplied unmarked.

Maluform®
Part n°	Outer diameter (mm)	Tolerances (mm)	Weight (kg/km)	Breaking resistance (DAN)	Working pressure (bars)
0010710000	6	+/-0,10	25	45	17,5
0010720000	8	+/-0,10	42	60	17,5
0010730000	10	+/-0,10	48	110	17,5
0010740000	12	+/-0,12	59	135	15
0010750000	14	+/-0,15	73	135	15

Other sizes on request