fixed base	housing	female insert	male insert	auto shut-off insert

Made in anodised aluminium alloy and plated brass for the inserts, it allows connection of from 1 to 12 tubes (dias. 4, 6 or 8mm) full flow or with auto shut-off using normalised connectors.
This connector offers the advantage of the choic of components without tools.
Selective disconection under pressure is possible according to choice of female inserts.
It has a polarised assembly and its working pressure is 12 bars.
Inserts are pin-mounted.
Different sections can be mounted on the same circuit and are totally mixable for diameters 4, 6 and 8mm.

• Choice of connector
• Protection
• Dimensions

Rectangular pneumatic connectors (family PF418)
Part N°	Description
P452	fixed base ERX12
P451	housing and cable gland 29 CRX PG 29
P450	housing and cable gland 42 CRX PG 42
M9500052	cover plate for base CPE 12
M9500055	cover plate for housing CPC 12
P453	male insert IM Ø4
P454	male insert IM Ø6
P455	male insert IM Ø8
P456	female insert IF Ø4
P457	female insert IF Ø6
P458	female insert IF Ø8
P459	auto shut-off insert IFA Ø4
P460	auto shut-off insert IFA Ø6
P461	auto shut-off insert IFA Ø8

Impossibility to mount in housing				Cable gland clamping range
Insert	Part n°	Tube Dia. 8		Part n°	Dia.
Male	IM	1-2-11-12		PG 29	dia.15 from to dia.25
Femelle	IF	1-2-11-12		PG 42	dia.25 from to dia.38
auto shut-off	IFA	1-2-3-4-9-10-11-12

	cover plate		fixed base		housing and cable gland

panel base	housing base	short housing	long housing	mounting bracket

Made in blue anodised aluminium alloy, it ensures simultaneous connection of from 2 to 21 circuits of diameters 4, 6, 8 or 10mm.
This connector has the added advantage of allowing the choice of the different components without any tools.
Connection is polarised and the long housings afford mechanical support to the multitubes.
Working pressure is 12 bars and disconnection under pressure is not authorised.

• Choice of connector
• Part n°
• Diagram
• Assembly

Choice of connector
N° of tube	Dia. tube	Dia. connector	Dia. du multitube	cable gland size	cable gland capacity	panel thickness
7	4	50	15,5	PG 29	25 to 15 mm	1 to 4 mm
12	4	50	20,5	PG 29	25 to 15 mm	1 to 4 mm
21	4	80	23,5	PG 29	25 to 15 mm	1 to 6 mm
7	6	50	21,5	PG 29	25 to 15 mm	1 to 4 mm
12	6	80	28,5	PG 42	38 to 25 mm	1 to 4 mm
2	8	50	19,5	PG 29	25 to 15 mm	1 to 6 mm
4	8	50	23	PG 29	25 to 15 mm	1 to 4 mm
7	8	80	27,5	PG 42	38 to 25 mm	1 to 6 mm
12	8	80	36,5	PG 42	38 to 25 mm	1 to 6 mm
2	10	50	23,5	PG 29	25 to 15 mm	1 to 6 mm
4	10	80	27,5	PG 42	38 to 25 mm	1 to 6 mm
7	10	80	33,5	PG 42	38 to 25 mm	1 to 6 mm

N° of tube	Part n°
	Mounting bracket	Panel base ear	Housing base eca	Short housing cpc	Long housing cplt
7	P 205	P 004	P 104	P 200	P 202
12	P 205	P 005	P 105	P 200	P 202
21	P 206	P 018	P 118	P 201	P 203
7	P 205	P 009	P 109	P 200	P 202
12	P 206	P 010	P 110	P 201	P 203
2	P 205	P 011	P 111	P 200	P 202
4	P 205	P 012	P 112	P 200	P 202
7	P 206	P 013	P 113	P 201	P 203
12	P 206	P 014	P 114	P 201	P 203
2	P 205	P 015	P 115	P 200	P 202
4	P 206	P 016	P 116	P 201	P 203
7	P 206	P 017	P 117	P 201	P 203

Mounting bracket + panel base	Housing base	Housing short or long		Cable gland	Mounting bracket (front view)

Bulkhead connector	Long housing	Mounting bracket

Made in blue anodised aluminium alloy, it ensures simultaneous connection of from 4 to 21 circuits of diameter 4, 6, 8 or 10mm and can be used on multiple bulkheads.
This connector is available in diameters 50 and 80mm and offers the advantage of being able to choose the tool-less components. The connection is polarised and the long housings ensure mechanical support to the multitubes.
Working pressure is 12 bars and disconnection under pressure is not authorised.

• Choice of bulkhead connector
• Part n°
• Diagram
• Assembly

Choice of bulkhead connector
N° of tube	Dia. tube	Dia. connector	Dia. multitube	Cable gland size	Cable gland capacity	Panel thickness
7	4	50	15,5	PG 29	25 to 15 mm	1 to 8 mm
12	4	50	20,5	PG 29	25 to 15 mm	1 to 8 mm
21	4	80	23,5	PG 29	25 to15 mm	1to 8 mm
7	6	50	21,5	PG 29	25 to 15 mm	1 to 12 mm
12	6	80	28,5	PG 42	38 to 25 mm	1 to 12 mm
4	8	50	23	PG 29	25 to 15 mm	1 to 12 mm
7	8	80	27,5	PG 42	38 to 25 mm	1 to 12 mm
12	8	80	36,5	PG 42	38 to 25 mm	1 to 12 mm
4	10	80	27,5	PG 42	38 to 25 mm	1 to 15 mm
7	10	80	33,5	PG 42	38 to 25 mm	1 to 15 mm

N° of tube	Part n°
	Mounting bracket	Bulkhead connector PC	Long housing CPLT
7	P 205	P 230	P 202
12	P 205	P 231	P 202
21	P 206	P 232	P 203
7	P 205	P 233	P 202
12	P 206	P 234	P 203
4	P 205	P 235	P 202
7	P 206	P 236	P 203
12	P 206	P 237	P 203
4	P 206	P 238	P 203
7	P 206	P 239	P 203

Mounting bracket + panel base		Long housing		Cable gland	Mounting bracket (front view)

ISO T1 bases	Blanking plate	End plates	Plugs

Made in black anodised aluminium alloy, it ensures actuator drain whilst maintaining stackability.
Exhaust is collected at 12 bars maximum with lubricated or dry air. locking is an optional availability.
This product is evolutive as it offers the possibility of changing cartidge diameters (4, 6 or 8mm).

• Choice of a base
• Exemple
• Diagram
• Dimensions

Choice of a base
ISO T1 base outlet
INF	Part N°		LAT	Part N°		DS	Part N°
ET1 INF 1	P 300		ET1 LAT 1	P 301		ET1 DS 1	P 315
ET1 INF 2	P 311		ET1 LAT 2	P 314		ET1 DS 2	P 316
ET1 INF 3	P 319		ET1 LAT 3	P 320		ET1 DS 3	P 321
ET1 INF 4	P 322		ET1 LAT 4	P 324		ET1 DS 4	P 326
ET1 INF 5	P 323		ET1 LAT 5	P 325		ET1 DS 5	P 327

Locking option : Part N° C / code : P322
Evolutive cartridges : Part N° FTL 8-4 / Part N° FTL 8-6 / Part N° FTL 8

Made in black anodised aluminium alloy, it ensures the mounting of the valve directly on the cylinder.
It can be coupled with the following functions :
- Speed control by flow reduction.
- Position locking by valve.
- Position detection by pressure drop valve.
The following table gives the different characteristics of monofuction and multifunction cylinder bases.

• Characteristics of bases
• Choice of base
• Assembly
• Diagram

Characteristics of bases
	cylinder bases
	Monofunction	Multifunction
Black anodised aluminium alloy	X	X
Pressure 12 bars	X	X
Cylinder mounting by ordinary banjo	X	X
Cylinder mounting by flow reducing banjo	X	X
Collected exhausts 1/4” or 3/8” bsp		X
Independent exhausts 3/8” bsp (optional)		X
Independent exhausts with integrated silencer	X
Pilots - 12 - 14 in 3/8” bsp		X
Supply port .1. by dia 8mm quick-connect	X
Supply port .1 by 3/8” bsp		X
Outlet - 2 - (see table of base choice)	X	X

Choice of base
Monofunction base	Part N°	Code
Outlet 2 : joint	EV1 SJ	P360
Outlet 2 : 1/4” bsp	EV1 S 1/4”G	P361
Multifunction base	Part N°	Code
Outlet 2 : joint	EV1 MJ	P362
Outlet 2 : 1/4” bsp	EV1 M 1/4”G	P363

Working conditions : x>a+b
Tube cut : T = x-136

standard	with cylinder base
D = X meter	D = 0

For parallel mounted cylinders : please consult us

Closure plate	Single spool module	Supply plate	Blanking plug

Made in blue anodised aluminium alloy, it authorises pneumatic flow stoppage by a simple “push-pull” action with draining via a sintered brass silencer.
Its 1/2” bsp supply ensures full flow for a working pressure of 12 bars.
Its modularity allows mounting of as many valves as required with foolproof assembly and lockable function.

• Choice
  of module
• Diagram
  
  
• Series mounting
  with common pressure
• Parallel assembly
  without common pressure

Module	Supply plate	Closure plate	Accessories	Code
RBM 1T8				P410
RBM 1T 1/4 GAZ				P421
RBM 1T 1/4 NPT				P425
	RBA 1T			P411
		RBF 1T		P412
			Lock Part N° C	P322
			Blanking plug Part N° RBO	P312

A 3/2 “push-pull” valve

S1 from to S6 = P1

S1 = P1	S2 = P2	S3 = P3	S4 = P4	S5 = P5	S6 = P6

Closure plate	Twin spool module	Supply plate	Blanking plug

Made in blue anodised aluminium alloy, it authorises pneumatic flow stoppage via a simple “push-pull” action with draining through a sintered bronze silencer.
Its 1/2” bsp supply ensures full flow for a working pressure of 12 bars.
Its modularity allows the mounting of as many valsves as required with foolproof assembly and locking function.
This product is evolutive, offering the possibility of changing cartridge diameters (dia. 4, 6 or 8mm).

• Choice
  of module
• Diagram
  
  
• Series mounting
  with common pressure
• Series mounting
  with 2 common pressures
• Dimensions
  
  

Module	Supply plate	Closure plate	Accessories	Code
P403
P407
P406
P414
P424
	P404
		P405	Lock Part N° C	P322
			Blanking plug Part N° RBO	P312

Evolutive cartridges : Part N° : FTL 8-4 / Part N° : FTL 8-6 / Part N° : FTLl 8

Two 3/2 “push-pull” valves

S1 from to S8 = P1

S1 from to S8 = P1	S9 from to S12 = P2